Many walking and bicycle trails call for an environmentally safe and aesthetically pleasing option. DirtGlue Industrial Polymer Emulsion with the right aggregate choice serves both requirements nicely as it did with this nature trail.
 |
 |
| Dimensions: |
5’ X appx. 1 mile
|
Date of application:
|
September 28, 2004
|
| Builder: |
Town Dept. of Public Works
|
Application method:
|
- Excavate weeds, grass, and soil to a depth of 6".
- Build Base: Fill with 3/8" minus aggregate base of 4" and compact.
Build Base: Fill excavated area to slightly
below finished grade with 3/4' crushed stone, compact and cover
with geotextile fabric to prevent fines from filtering (additional
stabilization will be a side benefit of the fabric).
- Build Surface: Fill with another 2" of aggregate , apply diluted DirtGlue Industrial solution
and compact with plate compactor.
Build Surface: Fill slightly above finished
grade with two inches of 3/8" minus crushed stone ensuring good
crown and good drainage. While surface aggregate is still loose,
mix in the DirtGlue and then compact thoroughly.
- Final phase: Apply thin layer of stone dust, spray top coat of diluted DirtGlue
Industrial solution, no compaction (this phase not completed in pictures).
Final Phase (OPTIONAL): Apply a thin layer
of stone dust to the finished surface while spraying DirtGlue to
glue stone dust in place.
|
|
Contact DirtGlue today and be on
the way to solving your soil stabilization
challenges.
Toll Free: 888 606.6108
Local: 978.388.3312
Fax 508 861.0550
Email:
or this form:
Copyright
© 2002-2008, DirtGlue® Enterprises, Amesbury,
Massachusetts 01913, USA. |
DirtGlue